Espressione 26260 Manual Del Usuario página 7

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

To clean the American Coffee elements
We recommend rinsing the machine parts with one or two cycles with running water only, without coffee
powder. This will remove all traces of powder deposited during transport.
• Place the fi lter support (10) inside the machine, taking care that the notch in the support meets with
the release button (25) see (Fig.4).
• Place the American coffee fi lter (9) in the fi lter support (10) .
• Close the top lid (8).
• Place the carafe (2) on the hot plate (4).
• Switch on the "AUTO/CAFFE' " button (E).
• As soon as the water comes out of the spout (11) in the fi lter support (10), switch off the "AUTO/CAFFE' "
button (E).
Warning!
The hot plate (4) switches on as soon as the American Coffee is poured and therefore, during this stage, it is
necessary to keep hands well away from it and to remove the carafe using the handle (1).
Remove all water from tank, glass carafe and overfl ow grill after upon action.
Now you can start to use this machine for making your delicious coffee.
HOW TO MAKE ESPRESSO
• Fill the water tank (6) with fresh water.
• Turn the steam control knob to the '●' position.
• Press "1cup/2cups" button (I) to select the amount of coffee to pour. Press once to select pouring of
one cup of coffee, at the same time the green light will be illuminated;
• Press twice to select two cups of coffee, the red light will be illuminated; Three times to select 3 cups
or one cup of pod coffee will be made, the blue light will switch on. Press again to shut off pouring.
• Continue to press "ESPRESSO" button (L). The pump is then activated. The "ESPRESSO" light (L) will
be fl ashed. Wait until a small amount of water fl ows out, which means that the boiler is pressurised.
• Press "ESPRESSO" button (L) off. As soon as the system has reached the required temperature, the
"ESPRESSO" light (L) will be off.
• Preheat the coffee cups by putting them on the cup rack (26) • Insert the correct fi lter into the fi lter
holder, choose the one-cup fi lter (18), the two-cup fi lter (19) or the pod fi lter (20).
• If using the fi lters (18) or (19), fi ll them with one or two measures of ground coffee and press down with
the measure (23); alternatively use the fi lter (20) and insert the standard 7g coffee pods.
• Insert the fi lter holder and turn it fi rmly to the right..
If too much ground coffee is put inside the fi lter, turning the fi lter holder may prove diffi cult and/
or you may get leaks from the fi lter holder when the coffee is being dispensed.
• Place one or two espresso cups beneath the fi lter holder (Place one cup if using pods).
• As soon as the "ESPRESSO" light is off, Then press "ESPRESSO" button on again.
• When a suffi cient quantity has run through (normally one fi lter coffee grounds or one pod can make
about 60ml coffee), the machine will be auto shut off the pump. Otherwise you can press "ESPRES-
SO" button to interrupted the produce. (if you want to pour a lower coffee).
To remove coffee residues from the fi lter, lift the release to block the fi lter (21) over the edge of the fi lter
itself. Turn the fi lter holder upside down and tap it gently (Fig. 5).
When warming up, your appliance may release small puffs of steam from the fi lter holder; this is per-
fectly normal.
Filling the water tank during use.
No special operation is necessary when the water in the tank runs out. Turn off the machine. Unplug it
from the socket-outlet. Open the lid (7). Pour cool tap water in up to the MAX level.
5
EN
Tabla de contenido
loading

Tabla de contenido