Espressione 26260 Manual Del Usuario página 13

Scale removal from the espresso coffee circuit
To remove the scale, proceed as follows:
- Switch off the machine and unplug it from the mains power.
If the appliance is disconnected from the mains power, the settings will all be reset.
- Pour the contents of the sachet in a litre of water, taking care to allow the product to dissolve comple-
tely.
- Pour the prepared solution in the tank (7).
- Place a container with a capacity of at least half a litre under the fi lter holder. Press the 1 cup/ 2 cup
button (l) to switch on the machine. When the light on the "ESPRESSO" button (L) stops fl ashing,
press it and pour about half of the tank's contents. Stop pouring by pressing the "ESPRESSO" button
(L). Wait for about 15 minutes and then pour out the other half of the contents of the tank.
- Switch off the machine by pressing the 1 cup/2 cups button (I) three times and unplug the machine.
- Refi ll the tank to the MAX level with fresh still water.
- Place a container with a capacity of at least half a litre under the fi lter holder seat.
- Press the 1 cup/ 2 cup button (l) to switch on the machine and start the espresso coffee function.
When the "ESPRESSO" button (L) light stops fl ashing, press the button and pour out about half of the
contents of the tank.
- Stop pouring by pressing the 1 cup/ 2 cup button (l) three times. Wait for about 15 minutes and then
pour out the other half of the contents of the tank.
- At this point the appliance is once again ready for use.
Scale removal from the drip coffee circuit
To clean and remove scale, proceed as follows:
- Switch off the machine and unplug it from the mains power.
If the appliance is disconnected from the mains power, the settings will all be reset.
- Pour the contents of the sachet in a litre of water, taking care to allow the product to dissolve comple-
tely.
- Pour the prepared solution in the tank (7).
- Place the carafe (2) under the dispenser (11) (Fig.7).
Press the AUTO/CAFFE button (E) twice and after a few seconds, the solution will start to come out
of the pour nozzle (27). Pour out about half of the tank's contents. Stop the pouring by pressing the
AUTO/CAFFE (E) button for the third time. Wait for about 15 minutes and then pour out the other half
of the contents of the tank.
- Switch off the machine and unplug it from the mains power.
If the appliance is disconnected from the mains power, the settings will all be reset.
- Refi ll the tank to the MAX level with fresh still water.
- Place the carafe (2) under the dispenser (11) (Fig.7).
Press the AUTO/CAFFE button (E) twice and after a few seconds, water will start to come out of the
pour nozzle (27). Pour out about half the contents of the tank.
- Stop pouring by pressing the AUTO/CAFFE (E) button for the third time. Wait about 15 minutes and
then pour out the other half of the contents of the tank.
- At this point, the appliance is once again ready for use
It is important that during this operation, you use the carafe (2) provided, since the lid (3) has a
spout that serves to open the valve of the dispenser (11)
11
EN