Starting And Stopping; Operating Tips - SNOWJOE SUN JOE 24V-HCS-CT Manual Del Operador

Operation

Starting and Stopping

m
CAUTION!
Starting, stopping, and restarting an electric
motor repeatedly within a few seconds can generate a great
deal of heat and damage the motor. To protect the life of your
cordless pruning saw, always wait at least five seconds after
stopping before restarting the saw.
m
WARNING!
Be sure that the chain is not in contact with
any object when you start the motor.
m
WARNING!
Keep hands away from chain. Keep hand
on handle. Do not overreach.
A good, firm grip on the tool will help you maintain control.
Maintain a firm grip by place your hand on the handle with
thumb and fingers encircling the grip. A firm grip combined
with proper positioning of the saw will help you maintain
control of the saw. Do not let go of the saw while it is in
operation.
m
WARNING!
Do not operate the cordless pruning saw in
a tree, on a ladder, or on a scaffold. Using the tool under such
circumstances is extremely dangerous.
m
CAUTION!
The chain will continue to run for several
seconds after turning off the tool.
Do not use the pruning saw under wet conditions. Use extreme
caution when cutting small brush, saplings, or limbs under
tension because slender and tense material may catch the saw
and be whipped toward you, pull you off balance, or spring
back.
Do not use the saw to cut vines and/or small underbrush.
m
WARNING!
Do not let familiarity with this type of tool
prevent you from taking all necessary precautions. Remember
that a careless fraction of a second is sufficient to inflict
serious injury.
m
WARNING!
m
WARNING!
damage to the bar and chain. Use only a good quality bar
and chain oil designed specifically for use with chain saws.
1. Prior to each cutting session, run through the daily
checklist (see pg. 18).
2. Insert the battery in the battery compartment. Push to
make sure it is locked in place (Fig. 8).
Fig. 7
3. To turn the tool on, hold the pruning saw firmly on the
handle grip. Press the safety lock button, and squeeze the
ON/Off switch. When the pruning saw is running, you can
release the safety lock button (Fig. 9).
Safety lock button
On/Off switch
4. To turn the tool off, simply release the On/Off switch.
NOTE: Do not squeeze the On/Off switch until you are
ready to make a cut.

Operating Tips

m
WARNING!
1. Do not use the machine without reading the instructions
carefully. Become acquainted with the controls and
the proper use of the machine. Learn how to stop the
machine quickly.
12
Do not cut branches near electrical wires.
Failure to lubricate the chain will cause
Battery pack
For your safety and that of others:
Fig. 8
Fig. 9