Control Board Connection (Optional) - Binzel Abicor PP Instructivo De Servicio

4 Putting into operation

4.3.1 Control board connection (optional)

1
1 Feed unit
2 Control board
Fig. 5 Connection diagram
EN - 10
The control lead is open on the machine side. The customer has to provide the
connection of a suitable plug. If all data are provided, the machine can also
be delivered ready-to-connect. Otherwise choose a compatible plug for your
power supply and solder it to the corresponding leads according to the
connection diagram.
5 4
3 Torch trigger control lead
4 Push motor line
1 = Motor (+)
2 = Motor (-)
3 = Pot. min.
4 = Pot. max.
5 = Pot. max.
Tab. 6 Colour coding
Operating voltage 36 - 42 V AC
The control board guarantees a synchronous run between the push motor in the
feed case and the pull motor in the manual torch. The green/white two-wire
motor line must be connected in accordance with the following connection
diagram:
 Fig. 5 on page EN-10
Green to plus, white to minus:
2
1/2 3/4/5
3
5 Feed motor control
Green (GN)
White (WH)
White (WH)
Brown (BN)
Green (GN)
PP