Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

EN
Assembly and Disassembly
1
2
+
Note:
• Remove the plastic rings before installing the lamp.
• When connecting the lamp sections with the base or the lamp head, rotate in different directions with both
hands. Do not screw with too much force. If it gets stuck, undo and restart again.
• Align the male connector with the female connector, then click and rotate 90° or 270° to lock in place.
3
90
o
/270
o
+
How to Use
1
1. CCT Button
2
2. Power ON/OFF
3
3. Power Indicator
Standby Mode
Connect the cable connector from Section #1 to the power adapter. Plug the adapter into a power source.
The lamp will enter standby mode, and the Power Indicator on the Power Button will light up in blue.
Power On / Off
• Tap the Power ON/OFF button once to turn on the lamp. The Power Indicator will turn off.
• Tap and hold the Power ON/OFF button to turn off the lamp. The Power Indicator will turn on.
Color Temperature / Brightness Adjustment
• When the lamp is turned on, tap the Power ON/OFF button to adjust the brightness (cycle through 20%,
50%, 100%).
• When the lamp is turned on, tap the CCT button to adjust the color temperature (cycle through 3300K,
4500K, 5500K).
• Default setting: 100% Brightness, 3300K Color Temperature

Memory Function

With the power connected, each time the lamp is turned on, it will automatically return to the brightness of
the last time it was turned off.
Adjust the Lamp Head
The lamp head is 20° rotatable in horizontal 360° directions.
01/02
Tabla de contenido
loading

Tabla de contenido