Panasonic TY-42TM6P Manual De Instrucciones página 7

All manuals and user guides at all-guides.com
Slot Nos. of the PDP unit that are compatible with terminal board attachments.
37inche
42inche 50inche
Connection
computer
Notes:
(1) The PC input terminals are DDC1/2B-compatible. If the computer being connected is not DDC1/2B-compatible,
you will need to make setting changes to the computer at the time of connection.
(2) Some PC models cannot be connected to the set.
*There is no need to use an adapter for computers with DOS/V compatible D-sub 15P terminal.
(3) The computer shown in the illustration is for example purposes only.
(4) Additional equipment and cables shown are not supplied with this set.
(5) Component Input is possible with the pin 1, 2, 3 of the D-sub 15P Connector.
(6) For details of compatibility with input signals, please refer to Plasma Display operating instructions.
(7) D-sub 15P connector does not support the DPMS function.
Signal Names for D-sub 15P Connector
11 12 13 14 15
6 7 8 9 10
1 2 3 4 5
Pin Layout for PC Input
Terminal
Slot1 ,Slot2
Slot1 ,Slot2 ,Slot3
COMPONENT/RGB IN
SLOT1
Stereo plug
Connect a cable which matches
the audio output terminal on the
computer.
Audio
RGB
PC cable
Conversion adapter
(if necessary)
Pin No. Signal Name Pin No.
1 R (P /C ) 6
R R
2 G (Y) 7
3 B (P /C ) 8
B B
4 GND (Ground) 9
5 GND (Ground) 10
AUDIO
SLOT 1 2 3
SLOT3
SLOT2 SLOT3
D-sub 15p
Signal Name Pin No. Signal Name
GND (Ground) 11 GND (Ground)
GND (Ground) 12
GND (Ground) 13 HD/SYNC
NC (not connected) 14
GND (Ground) 15
PC IN
SDA
VD
SCL
7