MSA FASIT Gallet F1 XF Manual De Funcionamiento página 7

3.2 Donning
The following adjustments have to be carried out when the helmet is donned.
(2) Adjust head size:
Turn knob clockwise to tighten the
ratchet headband.
Turn knob anticlockwise to loosen the
ratchet headband.
(3) Check that the helmet is correctly adjusted:
The helmet should not fall off when the
head is leaning forward and the chin
strap is unfastened.
The chin strap is equipped with 3 adjustment points to allow quick and simple adjustment while the
helmet is on the head.
The wearing angle shown here is indicative.
It may vary slightly depending on user's head size and shape.
- Via Orsera 13/b - 34145 TRIESTE - ITALY - Tel +39 040 825604 -
(5) Adjust wearing height with the Velcro
fasteners on the two rear suspension straps.
(1) Position the chin strap as shown before
donning the helmet.
(1) Maximally loosen the 3 adjustment points.
(2) Place helmet on head. Make sure that it is well positioned.
(3) Close the buckle of the chin strap.
(4) Tighten the chin strap.
(5) Tighten the two rear adjustment straps until a tight but still
comfortable fit is achieved.
Adjusting the Helmet
www.fasit.it - [email protected]
GB
7