Device Description; Cleaning And Maintenance - ulsonix UNICLEAN 7 Manual Del Usuario

EN
3. USE GUIDELINES
The device is a mobile washbasin and is used for hand
washing etc., sanitary purposes without the need for
external water and sewage connections.
The user is liable for any damage resulting from
unintended use of the device.

3.1. DEVICE DESCRIPTION

1
2
11
9
5
10
6
11
7
8
1
3
4
5
6
7
8
1. Tap
2. Water container plug
3. Soap dispenser
4. Paper roll holder
5. Washbasin with a water container
6. Foot pump (clean water)
7. Platform with a sump
8. Drain plug of the sump (front and rear)
9. Clean water supply hose
10. Wastewater drain hose
11. Transport handle (on both sides)
3.2. PREPARING FOR USE
APPLIANCE LOCATION
The ambient temperature must not exceed 45°C and the
relative humidity should not exceed 85%. Keep the device
away from any hot surfaces. The device should always be
used on an even, stable, clean, fireproof and dry surface and
beyond the reach of people with reduced mental, sensory
and mental functions. Use only clean water – the use of
contaminated water may lead to blockage of the pump and
its accelerated usage. Clean water in the container should
be changed regularly to avoid the build-up of impurities.
8
ASSEMBLING THE DEVICE
1. Remove the foot pump from the packaging and then
attach a short clean water hose to its suction stub
end, sliding it all the way to the very beginning of the
stub end process.
2. Attach a long hose for clean water supply to the
second outlet stub end of the foot pump, also sliding
it to the very end of the stub end process.
3. Fasten both hose ends to the stub ends with hose
clamps.
4. Place the washbasin with the water container on the
platform with the sump in the position in which they
will be finally after assembly. Through the cut-out in
the water container, which will form a tunnel with the
platform, lead the foot pump out and then use four
screws to fix it to the platform.
11.11.2020
5. Fix the washbasin with the water container to the
platform with the sump using the enclosed screws
and connecting washers.
6. Attach the other end of the short water hose to
the stub end of the water container. Secure it with
a hose clamp. Insert the drain hose's end of the
washbasin into the opening of the sump.
11.11.2020
9 EN
7. Using screws, fasten the liquid soap container to the
left side of the washbasin with a water container, and
to the right side – a paper roll holder.
8. Fill the water container with the plug on the left side
of the washbasin and (optionally) fill the liquid soap
dispenser and put on the paper roll. Then bleed
the clean water system by holding the pump until
water starts to flow out from the tap. Finally, check
the tightness of the hose connections and the drain
plugs.

3.3. CLEANING AND MAINTENANCE

a) Use only non-corrosive cleaners to clean the surface.
b) After cleaning the device, all parts should be dried
completely before using it again.
c) Store the unit in a dry, cool place, free from moisture
and direct exposure to sunlight.
d) The device must be regularly inspected to check its
technical efficiency and spot any damage.
e) Use a soft, damp cloth for cleaning.
f) Do not use sharp and/or metal objects for cleaning
(e.g. a wire brush or a metal spatula) because they
may damage the surface material of the appliance.
g) Do not clean the device with an acidic substance,
agents of medical purposes, thinners, fuel, oils or
other chemical substances because it may damage
the device.
h) When the device is not used for a long time, empty
the containers.
DISPOSING OF USED DEVICES
Do not dispose of this device in municipal waste systems.
Hand it over to an electric and electrical device recycling
and collection point. Check the symbol on the product,
instruction manual and packaging. The plastics used
to construct the device can be recycled in accordance
with their markings. By choosing to recycle you are
making a significant contribution to the protection of our
environment. Contact local authorities for information on
your local recycling facility.