Electrical Requirements - EAS ELECTRIC EMC1775I Manual De Instrucciones

The refrigerator must be disconnected from the source of electrical supply before attempting
the installation of accessory
Refrigerant and cyclopentane foaming material used for the refrigerator are flammable.
Therefore, when the refrigerator is scraped, it shall be kept away from any fire source and be
recovered by a special recovering company with corresponding qualification other than be
disposed by combustion, so as to prevent damage to the environment or any other harm.

1.2 Electrical requirements

Do not remove ground prong.
Do not use an adaptor.
Do not use extension cord
•
Failure to follow these instructions can result in death, fire or electrical shock.
•
Before you move your refrigerator into its final location, it is important to make
sure you have the proper electrical connection.
•
Recommended Earthing Method
A 220～240 Volt /50 Hz AC only 10 ampere fused and properly earthed electrical
supply is required. It is recommended that a separate circuit serving only this
appliance be provided. Use a receptacle which cannot be turned off with a switch
or pull chain. Do not use an extension cord.
•
Before performing any type of installation, disconnect the refrigerator from the
electrical source. When you are finished, connect the refrigerator to the electrical
source and reset the control to the desired setting.
.
19 V.1