Turbo Button - Giatsu RA1A-WIFI Manual De Usuario

Buttons on remote controller
● In static swing condition, pressing this button, the swing angle of left&right swing louver
changes as below:
● When selecting "
conditioner will swing left&right automatically at the maximum angle.
● When selecting "
swing. Left&right swing louver of air conditioner will stop at that position as shown by the
icon to swing.
● When selecting "
will swing circularly according to the angle as shown by the icon.
Note:
There is no this function for the units. If press this button, the main unit will sound, but it also
runs under original status.
+ and - button
Press "+" or "-" button once to increase or decrease 1°C of set temperature. Holding "+" or
"-" button, set temperature on remote controller will change quickly. On releasing button after
setting is finished, temperature indicator on indoor unit will change accordingly. (Temperature
can't be adjusted under auto mode)
● When setting TIMER ON, TIMER OFF or CLOCK, press "+" or "-" button to adjust time
(Refer to CLOCK, TIMER ON, TIMER OFF buttons).

TURBO button

Press this button to turn on or turn off the TURBO function in cool,heat,fan mode.
Note:
● Press "QUIET" or "FAN" button the unit will quit this function.
● This function is no use in auto mode or dry mode.
HEALTH button
Press this button to turn on or turn off the health function.
Note: This function is not available for some models.
SLEEP button
Press this button to turn on or turn off the SLEEP function under cool,heat ,dry mode.
Note:
● This function is off as defaulted after power on.
● It will be cleared after changing mode.
● It is no use under "FAN" mode and "AUTO" mode.
No display
" with remote controller, it's auto swing. left&right swing louver of air
, , , ,
", it's the circulating swing. Left&right swing louver of air conditioner
, " with remote controller,it's the fixed position
7