Using The Prevena™ Dressing With Prevena™ Therapy Units; Connecting The Prevena™ Dressing To Prevena™ 125 Therapy Units; Connecting The Prevena™ Dressing To The Prevena Plus™ 125 Therapy Units - KCI Prevena Intrucciones De Uso

USING THE PREVENA™ DRESSING WITH PREVENA™ THERAPY UNITS
CONNECTING THE PREVENA™ DRESSING TO PREVENA™ 125 THERAPY UNITS
1. Remove the PREVENA™ 45ml Canister from the sterile package. Do not use if package has been
torn or the sterile seal has been compromised.
See the PREVENA™ 125 Therapy Unit Clinician Guide for additional information.
CONNECTING THE PREVENA™ DRESSING TO THE PREVENA PLUS™ 125 THERAPY
UNITS
For connecting to other KCI V.A.C.® Therapy Units, see the Using the PREVENA™ Dressing with KCI
V.A.C.® Therapy Units section.
Tubing
Ports/
Caps
See the PREVENA PLUS™ 125 Therapy Unit Clinician Guide for additional information.
Side Tabs
2. Insert the canister into the PREVENA™ 125 Therapy
Unit and slide inward until canister clicks. Canister
is fully inserted when the side tabs are flush with
the body of the therapy unit.
3. Connect the dressing tubing to the canister tubing
by twisting the connectors until they lock.
4. Begin therapy.
1. Connect the SENSAT.R.A.C.™ Pad tubing to the PREVENA PLUS™
Connector:
Push the connectors together
•
Twist the connectors to lock
•
2. Connect the PREVENA PLUS™ Connector to the canister by aligning
and plugging connector at end of tubing onto tubing ports on side
of canister. Push together firmly. Ensure clamp on tube is open.
Position clamp away from patient.
3. Begin therapy.
19