Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Harbor Breeze® is a registered trademark of LF,
LLC. All Rights Reserved.
Federal regulations require ceiling fans with light kits manufactured or imported after
January 1, 2009, to limit total wattage consumed by the light kit to 190W. Therefore,
this fan is equipped with a wattage limiting device.
WARNINGS
• READ AND SAVE THESE INSTRUCTIONS.
• Read this manual carefully and completely before attempting to assemble, install or operate this product.
• Be sure you read and understand the Safety Precautions on page 3 of these instructions.
• Do not discard fan carton or foam inserts. Should this fan need to be returned to the factory for repairs, it must be
shipped in its original packaging to ensure proper protection against damage that might exceed the initial cause for
return.
CAUTION: Before proceeding, be sure to shut off electricity at main switch or circuit breaker in order to avoid
electrical shock.
WARNING: To reduce the risk of fire or electrical shock, do not use the fan with any solid state speed
control device or control fan speed with a full range dimmer switch.
WARNING: To reduce the risk of fire, electrical shock, or personal injury, do not bend the blade arms when
installing them, balancing the blades, or cleaning the fan. Do not insert foreign objects between the rotating fan
blades. Mount to outlet box marked "ACCEPTABLE FOR FAN SUPPORT" and use mounting screws provided with
the outlet box. Most outlet boxes commonly used for the support of lighting fixtures are not acceptable for fan
support and may need to be replaced. Consult a qualified electrician if in doubt.
Questions, problems, missing parts? Before returning to your retailer, call or contact our customer service
department at 1-800-527-1292, 8:30 a.m.-5:00 p.m., CST, Monday-Friday.
GALILEO/CEILING FAN
GALILEO/VENTILADOR DE TECHO
1
SOS ITEM/ARTICULO SOS #0131430
(página 13)
MODEL/MODELO #E-GAL52BC4GRS
E192641

Capítulos

Tabla de contenido
loading

Resumen de contenidos para Harbor Breeze GALILEO E-GAL52BC4GRS

  • Página 13: Galileo/Ventilador De Techo

    ARTICULO SOS #0131430 GALILEO/VENTILADOR DE TECHO MODELO #E-GAL52BC4GRS Harbor Breeze® es marca registrada de LF, LLC. Reservados todos los derechos. El reglamento federal requiere un ventilador de techo con juego de luz fabricado o importado después del 1 de enero del 2009 limite el vatiaje total que consume el juego de luz a 190W.
  • Página 14 INDICE DE MATERIAS Información de seguridad ....………………………………………………………………………...……..… 15 Contenido del paquete ......…………………………………………………………………………..……. 16 Preparación ..............................17 Instalación inicial ..........………………………………………………..…......17 Montaje del ventilador .......…………………………………………............18 Conexión de los cables ..........................18 - 19 Instalación final .……………………......................19 - 21 Funcionamiento del control remoto ......……………............…..21 Proceso de aprendizaje automático/El activar el código ..................22 Reemplazo de bombillas de la luz superior...
  • Página 15: Información De Seguridad

    INFORMACION DE SEGURIDAD POR FAVOR LEA Y GUARDE ESTAS INSTRUCCIONES Por favor lea el instructivo entero antes de tratar de ensamblar, instalar o hacer funcionar el producto. Si tiene alguna pregunta acerca del producto, por favor llame al servicio al cliente al 1-800-527-1292, de 8:30 a.m. a 5:00 p.m., hora central, de lunes a viernes.
  • Página 16: Contenido Del Paquete

    CONTENIDO DEL PAQUETE Pieza Descripción Cantidad Vástago Cubierta Soporte de montaje Brazo con voluta Bastidor del motor Conectador para el juego de luz Bombilla de base candelabro (pre-instalada en el bastidor del motor) Paleta Tornillo para la paleta 4,76 m (en paquete de artículos de ferretería) Arandela para la paleta (en paquete de artículos de ferretería)
  • Página 17: Preparación

    PREPARACION 1. Antes de empezar con el ensamblaje e instalación del producto, asegúrese de tener todas las piezas. Compare las piezas con la lista y los diagramas del "Contenido del paquete" en la página anterior. Si falta alguna pieza o se encuentra dañada, no trate de ensamblar, instalar o hacer funcionar el producto.
  • Página 18: Montaje Del Ventilador

    MONTAJE DEL VENTILADOR 1. Quite la clavija (M) y el sujetador (N) del yugo del bastidor del motor en la parte superior del bastidor del motor (E) y parcialmente tornillo de fijación afloje los tornillos de fijación. (Fig. 1) *Consejo útil: El montaje con vástago es más adecuado para techos de 2,44 m o más altos.
  • Página 19: Importante

    CONEXION DE LOS CABLES 1. [NOTA: Para cada conexión de cable que se va a hacer a continuación, use uno de los conectores para cable (K) provistos, Fig. 1 NEGRO asegurándose de atornillar el conector para cable (K) en el sentido de 120 V cables de corriente BLANCO...
  • Página 20 INSTALACION FINAL 2. Localice los tornillos del bastidor del motor que ya están instalados en la parte superior del bastidor del motor (E) y tornillos del quitarlos con un destornillador Phillips. Alinee los agujeros en el bastidor del motor brazo con voluta (D) con los agujeros en la parte superior del bastidor del motor (E).
  • Página 21: Funcionamiento Del Control Remoto

    INSTALACION FINAL 5. Instale las tres bombillas halógenas (R) de 50 vatios máx. incluidas. (Fig. 5) IMPORTANTE: Cuando necesite reemplazar las bombillas, por favor permita que se enfríen las bombillas y el juego de luz antes de tocarlos. Fig. 5 FUNCIONAMIENTO DEL CONTROL REMOTO Botones de funcionamiento en el panel del transmisor (P): Botón HI...
  • Página 22: Proceso De Aprendizaje Automático/El Activar El Código

    PROCESO DE APRENDIZAJE AUTOMATICO/EL ACTIVAR EL CODIGO PRECAUCION: Se puede programar el transmisor del control remoto (P) para usar con varios receptores o ventiladores. Si no desea hacer esto, apague el interruptor de pared de cualquier otro receptor o ventilador programable. 1.
  • Página 23: Localización De Fallas

    LOCALIZACION DE FALLAS ADVERTENCIA: Antes de empezar cualquier trabajo, corte el suministro de electricidad para evitar un choque eléctrico. Problema Causa posible Acción correctiva El ventilador no funciona. 1. No hay electricidad o se ha 1. Conecte la electricidad o inspeccione saltado un fusible.
  • Página 24: Garantía

    LOCALIZACION DE FALLAS Problema (cont.) Causa posible (cont.) Acción correctiva (cont.) [El ventilador funciona pero 5. El juego de luz sobrepasa los 5. Ponga bombillas en el juego de las luces no, (cont.)] 190W permitidos, haciendo que se luz que suman no más de 190W. interrumpa la corriente eléctrica que va al juego de luz debido al aparato que sirve para limitar el...

Este manual también es adecuado para:

0131430

Tabla de contenido