Aqua TECHNOPOOL PH-RX Manual De Instalación página 4

2.6 Accessories construction
Electrode assembly :
Put off the cap of the electrode (Fill the cap with ¾ of water to store the electrode)
Assembly the electrode respecting the order of the pieces shown in the central figure.
Insert the electrode into the electrode holder "j" pushing and rotating to the left and right.
When all the pieces are in the electrode holder screw the nut but not totally to push the
electrode till the foot of the tube and to retire it for 2 cm so to adjust the electrode at the
centre of the hose.
Now it is possible to screw totally the nut of the electrode holder "j".
A-TECHNOPOOL PH-RX 28/06/2010 4/64