Childproof Lock; Meat Probe - Infiniton DG70 Manual Del Usuario

Caution!
After the appliance switched o", it becomes very hot especially inside the cavity. Never
touch the interior surfaces of the appliance or the heating elements. Use oven gloves to
remove accessories or ovenware from the cavity, and allow the appliance to cool down.
Keep children at a safe distance at the same time to avoid the injury of burns.
Timer
You can use timer function by touch
for remind.
At the first touch of
Touch again, then the setting is finished.
You can set the timer before and during cooking process, but when you are selecting
function and temperature, it's not available.

Childproof lock

Your appliance has a childproof lock so that children cannot switch it on accidentally or
change any settings.
When you give a long press for 3 seconds, childproof lock is activated. A long press for 3
seconds again the oven is unlocked.
You can activate and deactivate childproof lock when the oven is work or not. Give
a long press for 3 seconds you can switch on and o" the childproof lock. When the
childproof is on, there will be a

Meat probe

Your oven has an additional meat probe function
into the position , the
changed to show the setting temperature of meat probe , you can turn the right-side
knob to change the setting . To choose the fuction , turn the left-side knob to the one you
need , then adjust the core temperature the same way with the right-side knob, and
finally turn the oven on by pressing (Before , make sure everything is well prepared ) .
In this situation , icon
setting and core temperature setting . And you can get the setting changed also during
the process of oven on.
Notes
1. Meat probe can be used together with rotary system;
2. While using meat probe , please make the head of it into the food instead of some-
where else , for the sake of long-term using;
3. Only use the temperature probe recommended for this oven.
. When the time arrived, oven will give "beep"
, set timer by hours, then touch
in the status bar.
icon will be light on . At the same time , the clock area will be
is used to change the setting between meat probe temperature
again, set timer by minutes.
. When you insert the meat probe
7