Tabla de contenido
Idiomas disponibles
Idiomas disponibles
To clean the filters:
- Close the water inlets by tightening the screws on the check valve caps;
- Remove the cartridge by unscrewing it from the body using a 24 mm spanner in an anti-clockwise
direction (be careful not to turn the adjustment rod so as not to compromise mixer tap calibration)
- Clean the cartridge under running water. In the presence of limescale, soak it for at least one night in
vinegar or a descaling solution
- Rinse thoroughly and reassemble the cartridge
- Reopen the water inlets by loosening the screws on the check valve caps
- Use a thermometer to check that the water coming out is at the desired temperature
E
N
G
32
33
E
N
G
Tabla de contenido
