Operation And Maintenance; Wall Mounting - hamach 000478 Instrucciones De Uso

A) The work area has to be set according the health- en safety regulations (D.L. 626/94). Keep the
work area clean. Cluttered work areas and work benches invite injuries. Do not use the tool in
presence of flammable liquids or gases.
B) Keep children and visitors away from the equipment and the work area.
C) Do not force the equipment. It will do a better and safer job at the rate for which it is intended.
D) Keep the equipment clean and fat-free. Follow the instructions for lubrication and replacement of
parts.
E) Stay alert and watch what you are doing. Use common sense. Do not operate the equipment when
you are tired.
F) Check damaged parts. Before further use of the equipment, a guard or an other part that is
damaged should be carefully checked to determine that it will operate properly and perform its
intended function.
G) Any part that is damaged should be properly repaired or replaced by an authorized service center.

4. Operation and maintenance

Before the installation of the HS 2008 it has to be:
1. Mounted on a HT120 table or on a wall;
2. Connect the air outlet on the existing vapor extraction (Ø 180 mm);
3. Connect the air supply though a quick-release coupling.
Mounting on the HT120 table

Wall mounting

Fig. 1.
Fig. 2.
14