Termozeta MATICA1200 Manual De Instrucciones página 16

ENGLISH
NO MORE WATER DURING USE
• The jet of steam decreases and finally disappears if there is no more
water in the boiler. The "low water" indicator light (9) goes on.
• Carefully follow the instructions given below to fill up the boiler
again:
- turn the boiler off by bringing the ON/OFF switch (2) to the "OFF"
position (0);
- press button (15) on the iron, until no more steam is being produced;
- unplug the appliance from the outlet;
- slowly unscrew the boiler cap (5) being careful of any eventual
residual steam;
- fill up the boiler following the instructions given in the "HOW TO FILL
THE BOILER WITH WATER" paragraph;
- switch on the appliance again following the instructions given in the
"STARTING UP" paragraph.
WARNING!
Always unplug the iron from the outlet before filling the boiler with
water.
WHEN YOU HAVE FINISHED IRONING
• Turn the boiler off by bringing the ON/OFF switch (2) to the "OFF"
position (0).
• Press button (15) on the iron, until no more steam is being produced.
• Unplug the appliance from the outlet.
• Press the button (11) to automatically wind up the power cord: when
carrying out this operation, make sure to accompany the cord while
it is being wound up. If the power cord does not wind up completely,
pull it out of its compartment again and repeat the operation.
• Rest the iron on the support base (3) and wait for the appliance to
completely cool down before carrying out any operations.
WARNING!
Never unscrew the cap (5) without emptying out all the steam from the
boiler.