Termozeta MATICA1200 Manual De Instrucciones página 14

ENGLISH
FOR STEAM IRONING
HOW TO FILL THE BOILER WITH WATER
• Always unplug the iron from the outlet when filling the boiler with water.
• Hold the cap (5) pressed down and unscrew it counterclockwise,
then slowly pour the water through the boiler opening using the
provided funnel (21) to avoid any leakage. Screw up the cap again
clockwise.
• Only use running water to fill the boiler without exceeding its
maximum capacity: never add detergents, chemical additives or
water softeners.
• The maximum boiler capacity is 1000 ml.
SUGGESTION: If water in your area is particularly calcareous, it
is advisable to use distilled water.
STARTING UP
• Rest the appliance on a firm flat surface.
• Place the iron on the boiler support base (3).
• Fill up the boiler as described in the previous paragraph.
• Completely unwind the power cord (7) and plug into the outlet.
• Turn the iron temperature control knob (18) to the steam ironing
position.
• The indicator light (19) on the iron will go on immediately and will go
out a few minutes later, when the required temperature is reached.
• Turn the boiler on by bringing the ON/OFF switch (2) to the "ON"
position (I): the light will turn on. The indicator light will be on until the
appliance is turned off.
• When the light (8) goes on, it is possible to use the jet of steam.
• During operation, the iron light (19) and the "steam ready" indicator
light (8) go on and then automatically go out indicating that the iron
temperature and the pressure in the boiler are constantly under
control.
• Rest the iron on the boiler support base (3) during ironing pauses.