PROZIS Orchid Manual Del Usuario página 7

INSTRUCTIONS
Product overview (see page 2, figure A)
1.Head mount area 2.LED light 3.On/Off Speed button 4.Direction button 5.Charging indi-
cator 6.USB cable port 7.Bottom cap 8.Cone grind head 9.Round sand head 10.Triangle buff
head 11.Cylinder shine head
First-time use:
• Charging: Rotate the bottom cap counterclockwise to open, plug in the USB cable, and
rotate clockwise to cover the bottom cap: see page 2, figure B1.
• Mounting: Mount the selected head by inserting it into the base and rotating clockwise:
see page 2, figure B2.
Indicators:
On/Off: Press the On/Off Speed button (3). The LED light lights up.
Speed Shift: While working press the On/Off Speed button (3). The LED light is on.
Direction Shift: While working press the Direction button (4). The LED light is on.
Timer: Automatic shut-off after two minutes, on each speed.
Low-battery alarm: LED light flashes.
Charging: Charging indicator flashes.
Fully charged: Charging indicator stays on.
HOW TO USE
1
5
1. Wash and dry your hands and feet before use.
2. Press On/Off Speed button to switch on.
3. Contour shaping: Use the cone head to grind along the arc of your nails.
4. Rough buffing: Use the round sand head to grind the nail surface and rub down lines.
5. Fine grinding: Use the triangle buff head to smooth out the nail surface.
6. Bright polish: Use the cylinder grind head to polish the nail surface.
7. Wash and dry your hands. Then, apply some skin oil or hand cream.
2
6
3
7
4
EN
7