USING THE POWER NUTRI BOWL
IMPORTANT: Review all warnings on
pages 32-33 before proceeding.
1 Plug in motor base and place on a clean,
dry, level surface such as a worktop
or table.
2 Add liquid then ingredients to the Power
Nutri Bowl. DO NOT add liquid past the
LIQUID FILL line or ingredients past the
MAX FILL line.
3 Place the Hybrid Edge Blades Assembly
on the top of the bowl and turn clockwise
to seal.
36
ninjakitchen.eu
4 Turn the bowl upside down and install on
motor base by aligning the tabs on the
bowl with the slots on the base. Then,
rotate bowl clockwise until it clicks. Once
locked in place, the programs will illuminate
and the unit will be ready for use.
NOTE: While processing, twist the Power
Paddle anti-clockwise continuously.
5a If using an Auto-iQ® program, select the
program that best suits your desired
output. During the blending process,
twist the Power Paddle anti-clockwise
continuously. The preset feature will
automatically stop at the end of the
program. To stop the unit at any time,
press the currently active program again.
5b If using START/STOP, once the
ingredients have reached your desired
consistency, press START/STOP again
and wait for the unit to come to a
complete stop. During the blending
process, make sure to twist the Power
Paddle anti-clockwise continuously.
6 Remove the bowl from the motor base
by turning it anti-clockwise and then
lifting up.
7 Remove the blade assembly by twisting
anti-clockwise. DO NOT store blended
contents with the blade assembly
attached. Only use the Spout Lid or
Storage Lid to cover. Exercise care when
handling the blade assembly, as the
blades are sharp.
8 To enjoy on the go, place the Spout Lid
or Storage Lid onto the bowl and twist
lid clockwise until firmly sealed.
9 Unplug the unit when finished. Refer
to the Care & Maintenance section for
cleaning and storage instructions.
ninjakitchen.eu
37
37