Infiniton 75CRGASG56 Manual De Instrucciones página 13

Valve adjustment
Valve adjustment should be done with the control knob set at Burner ON saving flame position.
Remove the knob, and adjust the flame with a tiny screwdriver (see fig.7 below).
Fig.7
Checking the adjusted flame:heat the burner at full open position for 10 minutes. The turn the knob into the saving
setting. The flame should not extinguish nor move to the nozzle. If it goes off or moves over to the nozzle, readjust the
valves.
Note.
It is up to the used to request converting the appliance to another gas type if so required by the local conditions at a
licensed gas fitter/ service.
Flame selection
At the burners adjusted correctly, the flames should be light blue, and the inner cone should be clearly visible. The
size of flame depends om the position of the related burner control knob.
-Burner ON，large flame
Fig.8
See also fig.8 for various operating options(flame size selection); the burner should be set at a large flame during the
initial phase of cooking to bring the food to boiling, and then the knob should be turned to the saving flame position
to maintain the cooking. It is also possible to adjust the flame size stepless.
It is prohibited to adjust the flame in the range between the Burnner OFF and Burner ON large flame
positions.
Significant quantities of energy can be saved if the appliance is used correctly, parameters set correctly, and appropriate
cookware is used.The savings can be as follows：
· Up to 60 per cent savings when proper pots are used,
· Up to 60 per cent savings when the unit is operated correctly and the suitable flame size is
chosen..
It is a prerequisite for efficient and energy-saving iperation of the cooktop that the burners are kept chean at all times
Saving flame
-Burner ON，small flame（saxing mode）
Loosen the adjustment
Spindle (see fig.7 below )
And adjust the flame
Loosen the adjustment
Spindle (see fig.7 below )
And adjust the flame
-Burner OFF