Construction And Functions - Turbosaver TS-1100 Manual De Usuario

The vacuum packaging system # 1
CAUTION:
SAVE THESE INSTRUCTIONS FOR HOME USE ONLY
AB: 1 MIN PER CYCLE

CONSTRUCTION AND FUNCTIONS

1. Vacuum / seal: to remove air from the bag and change automatically to seal the bag
after the vacuum is completed. When the operator wants to stop the operation, press
thebutton again
2. Seal only: To seal the bag without vacuum, so that the vacuum can be formed. When the
operator wishes to stop the operation, press the button again. Once the vacuum is com-
plete and the "Just Seal" LED is lit, press the button to stop the "Empty / Seal" operation
as well
3. Vacuum pulse: press the button and the device will begin to aspirate; When it is remo-
ved, it will stop. This process can be repeated. Then press "manual seal" when it reaches
the desired pressure, turn to seal. You can choose a different pressure according to the
type of food.
4. Upper seal: Keep the air away by forming a vacuum chamber with a lower seal. Clean
15