Siemens SIMATIC HMI Mobile Arctic KTP700F Manual Del Usuario página 10

Features
Front
Display
Touch screen
Operator controls
Interfaces
Differences compared to the standard product
In contrast to the basic device the HMI device is distinguished by the following features:
Temperature
Touch pen
Required software
You require the following software to configure the device:
• WinCC (TIA Portal) V15.1 SP1 or higher (Comfort/Advanced/Professional)
• Hardware Support Package (HSP) for TIA Portal V15.1 or V16.
NOTICE
Installation of the Hardware Support Package (HSP)
You can find the appropriate HSP in the following entry on the Internet: Support Package for KTP700F Mobile Arctic
(https://support.industry.siemens.com/cs/ww/en/view/109781303)
• Proceed exactly as described there.
• Observe all components and notes.
In TIA Portal > V16, the device is permanently integrated in the TIA Portal and no installation of an HSP is required.
10
• The external dimensions of the front correspond to the standard product
• GFG (Glass-Film-Glass) touch screens, analog resistive
• Decorative film with printing
• High-resolution TFT display in widescreen format with 16 million colors
• Suitable for use in daylight
• Anti-reflective and bonded for glare-free reading
• Resistive single touch screen
• Suitable for operation with gloves, pen and fingers
• 8 function keys
• 2 illuminated pushbuttons
• Emergency stop/stop pushbutton
• Enabling button
• Keyswitch
• 1 PROFINET/Industrial Ethernet
• SD card slot
• USB 2.0 ports: 1 x USB host interface (type A) with cover
Extended operating temperature range "Arctic"
A touch pen, which is placed centrally under the display, is integrated in the front.
KTP700F Mobile Arctic
A5E49199858-AB, 02/2021