Environment Protection - Jata hogar 773 Instrucciones De Uso

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
CALIBRATION
• You can calibrate the device, if desired.
• To do so, turn on the scale by pressing
and then hold MODE until "CAL" is
blinking, afterwards 3000.0g appears on
the display.
YOU MUST BEAR IN MIND
• Avoid exceeding the maximum capacity of
the scale (3 Kg). If the maximum capacity is
exceeded the message "O-Ld" will appear
on the display.
• You must proceed to change the battery
when the "Lo" symbol is showed on the
display. To do that, open the cover placed
in the back side of the appliance.

ENVIRONMENT PROTECTION

• Dispose the appliance according to the
local garbage regulations.
• Dispose the batteries according to the
local garbage regulations.
• You can leave this mode by pressing ,
if you want.
• Put that amount on the platform. If correct,
"PASS" will appear and automatically
returns to weighing mode.
• The scale is a sensible electronic instrument.
Some appliances of high frequency as
mobiles, radio stations, remote controls
and microwaves, can cause interferences
if the scale is used nearly of them. Keep
it far away of these points if you notice
irregularities on the display.
• The scale is not apt for commercial
transactions or medical purposes.
• Designed for domestic use only.
• Never throw away the appliance
or the batteries to the rubbish. So
you will help to the improvement
of the environment.
• The batteries must not be mixed
with other domestic residues.
7
Mod. 773
Tabla de contenido
loading

Tabla de contenido