FanJu FJ3389B-NORCC Manual Del Usuario página 11

Temperature Alert" starts to flash
► The icon of Upper limit of the Temperature alarm starts to flash. Use the
"▲" and "▼" buttons to set the required maximum temperature. Press " "
to confirm your setting.
►The icon of the Lower limit of the Temperature alarm starts to flash. Use
the "▲" and "▼" buttons to set the required minimum temperature. Press
" " button to confirm your setting and to end the setting procedure
7.6 Activating and Deactivating Temperature & Frost Alert
►Press " " button to activate or deactivate the remote temperature alert,
When the remote temperature alarm is activated, the temperature alarm
icon is displayed in the remote sensor bar
►When the remote channel temperature value exceeds the set temperature
range, will activate the alarm, the weather station will every minute
continuous alarm 5 times, at the same time, temperature alarm in alarm icon
" " flashes, its temperature value and alarm upper limit icon "Hi" or lower
limit icon "Lo" also flashes
►When the temperature of outdoor sensor is –1°C (+30°F) to + 3°C (+ 37°F),
the frost alarm will be activated, the frost alert icon " " flashing.
F.Y.I.:
► When the temperature is higher than the upper limit of the alarm
temperature setting, the activation of the upper limit alarm, symbol "Hi"
flashing,
► When the temperature is lower than the lower limit of the alarm
temperature, the lower limit alarm is activated, and the symbol "Lo" flashes
8. BACKLIGHT
► If the product is powered by batteries, touch the "
" " button. Backlight lit 15 seconds.
► When the power supply of the product is inserted into the power supply
adapter, the battery will automatically disconnect the power supply, and the
backlight will always be bright. Press the
of the backlight, you can adjust the 4 state: 3 different brightness backlight
and close the backlight. When the backlight brightness is not at the
FJ3389B-NORCC Manual
11
" field or press the
button to adjust the brightness