FanJu FJ3389B-NORCC Manual Del Usuario página 10

7.2 Current Temperature and Temperature Trend Display
► The current indoor temperature/humidity/barometric pressure and the
temperature/humidity trend (indoors) are shown in the LCD display.
► After successfully connecting with the outdoor sensor, the weather station
can display the outdoor temperature/humidity and the
temperature/humidity trend (outdoor)
► You may see the following displays:
7.3 RF Transmission Procedure
► The weather station automatically starts receiving transmission from
outdoor sensor for outdoor temperature & humidity after batteries inserted.
► The outdoor sensor will automatically transmit temperature and humidity
signal to the Weather Station after batteries inserted.
► If Weather Station failed to receive transmission from outdoor sensor ("-
-"display on the LCD), press and hold "▼" button for 3 seconds to receive
transmission manually. RF icon "
Station to receive the outdoor sensor.
7.4 Maximum/Minimum Temperature and Humidity
► To toggle indoor/outdoor maximum, minimum temperature and humidity
data, press the "MEMORY" button:
Once to show the maximum temperature and humidity values.
Twice to sow the minimum temperature and humidity values
Three times to return to the current temperature and humidity levels
► To reset the maximum and minimum temperature and humidity, press and
hold down the "MEMORY" button about 2 seconds. This will reset all
minimum and maximum data recorded to the current displayed values.
F.Y.I.:
► If the temperature reading is below ranges, the LL.L will be displayed. If
the temperature reading is above ranges, the HH.H will be displayed.
7.5 Outdoor Temperature Alert Setting
► Press and hold down the " " button for 2 seconds until the icon for the
FJ3389B-NORCC Manual
The temperature/humidity is rising.
The temperature/humidity is remaining constant.
The temperature/humidity is falling.
" flashes on the LCD，The Weather
10