Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Installation, use and maintenance
2.
SAFETY INSTRUCTIONS AND WARNINGS
Mains - preliminary
checks before
installation
Maintenance
control
Prohibitions
3.
FIRST AID RULES
Contact with
the product
Persons who
have suffered
electric shock
6 /64
Before installation, make sure that the electric power supply network is
fitted with a suitable earth-line and complies with the regulations in force�
WARNING
You must avoid any contact between the electrical power supply
and the fluid that needs to be pumped�
The device is NOT anti-explosive type�
The device must be installed outside areas at risk of explosion�
Do not install in areas where inflammable vapors may be present�
Before any checks or maintenance work are carried out, switch the system's
power off by disconnecting the plug from the socket�
WARNING
It is strictly forbidden to support or transport the system using a
power supply cable� It is strictly forbidden to support or transport
the system using a suction or outlet pipe�
In the event of problems developing following EYE/SKIN CONTACT,
INHALATION or INGESTION of the treated product, please refer to the
SAFETY DATA SHEET D�E�F�/AdBlue®/AUS32�
Disconnect the power source,
or use a dry insulator to protect
yourself while you move the
injured person away from any
electrical conductor� Avoid
touching the injured person with
your bare hands until he is far away from any conductor� Immediately
call for help from qualified and trained personnel� Do not operate
switches with wet hands�
NOTE
Please refer to the safety data
sheet for the product�
Bulletin M0289A ML rev. 00 EN | ES | FR
Capítulos
Tabla de contenido
