Operation And Use; Getting Started - Piusi THREE25 Instalación Uso Y Mantenimiento

Installation, use and maintenance
15.

OPERATION AND USE

Foreword

Getting started:

Push the empty
nozzle holder
16 /64
WARNING
To remove any substance residue or foreign matters from the pipes,
wash the system before putting it into operation�
To wash the system, follow the same dispensing procedures using
demineralized or deionized water and eventually rinse with
D�E�F�/AdBlue®/AUS32.
Directions on how to start and stop operation of the system are given
below:
During operation the motor may be hot: be careful�
For the proper functioning of the system, allow a 20-minute stop for
every 20 minutes of dispensing�
Operation of the pump without dispensing is only admitted for periods
of no longer than 3 minutes�
We recommend that the pump remains switched off whenever the
system is not in use�
If ever the voltage is lagging, push the switch to the OFF position and
return the nozzle to its rest position with its lever not activated�
Bulletin M0289A ML rev. 00 EN | ES | FR