Wall Mounting - Boston Acoustics TVee 26 El Manual Del Propietario

Subwoofer
Subwoofer Panel Controls
17
Power Input– Plug in the Power Cord
18
19
Subwoofer Volume – Adjusts the volume of the subwoofer for best balance with the soundbar.
20
Pair Button – Pre-paired at the factory. See Pairing the soundbar and subwoofer.
21
Status Indicator – Lights green when the subwoofer is active and red when it is standby mode.
22
Power Cord – Provides power to the subwoofer.
Place Your System
Decide on the location and position of the system before making any connections.
Soundbar Location
Place the soundbar on a table surface or shelf near the
television, or wall-mount the soundbar above or below
the television.
Keyhole mounts on the rear of the
soundbar permit wall mounting.*
Wall-Mounting
The TVee 26 soundbar can be wall-mounted using the integrated keyhole mounts. A mounting template can be found in
the product carton. Using a level tool, position and tape the template to the wall in the desired location.
Install hardware* using the template as a guide and then remove the mounting template from the wall. Connect your audio
and power cables prior to mounting the soundbar on the wall.
*Consult a person knowledgeable about your wall type to recommend suitable hardware for hanging the speaker. Usually it is
142-004203-2_Owners_Manual_TVee26_fini_English_Links.indd 5
SUBWOOFER
VOLUME
PAIR
22
here and plug the other end into an AC outlet.
SUBWOOFER
VOLUME
17 18 19 20 21
22
PAIR
5
6/25/12 6:47 PM