Maintenance And Care - HURAKAN HKN-PCR06 Manual Del Usario

OPERATION
1. Before using the device, first clean the inside of the tank with non-abrasive detergents.
2. Place the device vertically on a hard even surface.
3. Make sure the device is switched off, then plug it into a grounded socket.
4. Before first use, it is recommended to check whether the power supply complies with the
rated characteristics of the device as specified in the instruction manual.
5. Before switching on the equipment, open the top cover of the water tank and fill the tank
with water.
6. Turn on the power.
7. Remove limescale from the water tank regularly.

MAINTENANCE AND CARE

Do not use abrasive materials, metal sponges or brushes, sharp objects or cutting objects,
aggressive chlorine-containing cleaners, gasoline, acids, alkalis or solvents to clean the device.
1. Rinse the tank thoroughly. The device is now ready for use again.
2. Wash the top cover of the device and then wipe it thoroughly with a dry, soft cloth.
3. The inside of the tank is made of stainless steel, which can be cleaned with a sponge and
a degreasing cleaning agent.
4. In order for the device to function properly, the cavity in the middle of the base must be
free of limescale deposits. If necessary, use descaling agents.
DO NOT use baking soda to clean the equipment as this can cause discoloration of the device
and corrosion on the metal.
EN
7