SOKMAQ meiwa RT-70 F Instalación Operación Mantenimiento página 24

SECTION 9 - 50 HOUR OR WEEKLY ROUTINE MAINTENANCE
Contents Page
ENGINE OIL _____________________________________________________ _______________________________ 1
LUBRICATION OF MAIN BODY ____________________________________
________________________________ 1
CHECK AND CHANGE ENGINE OIL
Before checking or refilling engine oil, be sure the machine is located on a stable level surface and stopped.
When check oil do not thread the oil gauge (Figure 9-1) into oil filler to check oil level. If the oil level is below the lower
level (Figure 9-1) line on the dipstick oil gauge, refill with the proper oil to the upper level (Figure 9-1)(to the neck of oil
filler).
When changing oil stop the engine, loosen the drain plug (1, Figure 9-1), reinstall the drain plug before refilling oil.
Add new oil at the oil gauge (Figure 9-1) port.
Always use the best grade and clean oil. Contaminated oil, poor quality oil and shortage of oil cause damage to engine or
shorten the engine life.
Changing and filling:
Capacity of engine oil ............. 0.3 liters(RTX55,60), 0.4litters(RTX75,80)
Recommend engine oil .......... SAE 10W30
Use class SE, SF (API classification ) or higher grade oil.
Initial oil change .......... After 20 hours of operation.
Thereafter ................... Every 50 hours of operation.
LUBRICATION OF MAIN BODY
Check the Main Body oil level with the oil gauge before operation. Change oil after the first 50 hours and every 200
hours.
See Section 11.
9-1, 9-2
Telf.241-6002 [email protected] WWW.SOKMAQ.COM
DISTRIBUIDO EN EL PERÚ POR SOKMAQ S.A.C.