Care And Maintenance - RS Barcelona RS#PingPong table Folding Manual Del Usuario

Tabla de contenido
RS#PingPong table Folding — User's manual / Manual de usuario

Care and maintenance

METAL PARTS (steel and stainless steel)
This product has been made with resistant materials of
the highest quality. With correct care and maintenance
you will be able to enjoy it for many years. However, dirt
or other contaminants and bad use could damage it.
For the optimal conservation of pieces manufactured in
steel and stainless steel, especially if they are exposed
to the elements, periodic maintenance is advised.
For maximum resistance to corrosion, stainless steel
surfaces must always be kept clean. This maintenan-
ce must be tailored to the conditions to which your
product is exposed (dust, dirt, humidity in combination
with heat, salty or potentially corrosive environments,
etc.). This can vary from one to four times a month, in
normal settings, or up to once a day in cases of unhygie-
nic or very rough conditions.
You must be the one who adjusts and evaluates the
periodicity of the maintenance according to how the
material reacts, increasing or reducing it depending
on what is necessary for proper product care. In any
case, we recommend cleaning it at least once a week,
as a starting point.
Therefore, it's important to keep the product clean.
Please follow these simple instructions to keep the pro-
duct in good condition:
• For cleaning both steel and stainless steel, use only a
cloth dipped in warm water and mild soap. Never use
abrasive soaps or detergents, as they can leave scrat-
ches and produce discoloration.
• Rub gently with a damp cloth. Rinse and wring the clo-
th frequently, to keep it moist. Make sure to rinse well
and dry with another cloth.
• If the surface is glossy, you must wash it along the
grain, to avoid scratching the surface. On polished
surfaces, you must previously remove dust to avoid
scratching the surface.
• If the event of a spill, clean the stain as quickly as
possible.
• If you are unable to remove the stains with a damp
cloth, apply a metal cleaner (INOX-version stainless
steel cleaner) to the surface with a cloth. Read the
instructions for the cleaner carefully, and test it first on
an inconspicuous spot. Make sure to rinse well and dry
with another cloth.
• In the INOX version, to eliminate possible rust stains
that may appear due to a porosity defect, humidity, or
misuse, it is best to use a product directly to remove
rust spots.
When the product is extremely dirty, with stains, incrus-
tations, or signs of surface discoloration due to long
periods of neglect, or poor maintenance, we recommend
contacting professionals to restore the surface's initial
appearance.
HPL PARTS (field)
HPL does not require special care.
• Clean with a cloth dampened in warm water and mild
soap.
• Never use abrasive soap or detergent, sandpaper or
steel wool since they could scratch the surface or make
colours fade.
• Never use furniture polish which contains wax, since
these kinds of products tend to leave a sticky layer on
the surface which attracts dust and dirt.
IROKO WOOD (handles)
As a natural material, iroko can vary in colour, or even
crack due to humidity and sudden changes in tem-
perature. Exposed to the elements, iroko undergoes a
natural oxidation process that affects its colour, taking
on an attractive silver-grey tone.
Iroko pieces should be treated with a waterproof sealer
to protect them from moisture and stains (provided they
are cleaned immediately). However, this sealant naturally
vanishes over time.
We recommend treating the wood with sealant every
three months, or more frequently at dining and hospi-
tality establishments. To restore iroko's original appea-
rance, sand the entire surface and apply the sealant,
following the manufacturer's instructions.
Never use soaps or abrasive detergents, or furniture
cleaning products containing wax, as these types of
products form a sticky layer on the surface that attracts
dirt.
IF THE PRODUCT IS USED OUTDOORS, KEEP IT
CLEAN AND IN GOOD CONDITION, FOLLOWING
THESE INSTRUCTIONS MORE FREQUENTLY.
WHEN THE PRODUCT IS KEPT OUTDOORS AND IS
NOT USED FOR PROLONGED PERIODS, WE RE-
COMMEND YOU TO USE THE PROTECTIVE COVER.
5
Tabla de contenido
loading

Este manual también es adecuado para:

Rs#3Rs#3 wood

Tabla de contenido