Tabla de contenido
Idiomas disponibles
Idiomas disponibles
REPLACEABLE FUSE
User Servicing Instructions
1
.
Unplug your fan. Grasp plug and remove from the receptacle or other outlet device.
Do not unplug by pulling on cord.
2
.
Open fuse cover, located on the top of the plug, by using your thumb or a flathead
screwdriver (not included) to slide the cover down toward the prongs.
NOTE: Ensure that fuse cover is
completely open before attempting to
remove fuse.
3.
Remove fuse carefully by using a small
screwdriver to pry the fuse out of the
compartment by the metal ends of the fuse.
4.
Place plug on a solid, flat surface. Insert
new 2.5 Amp, 125 volt fuse into fuse
compartment and use a small screwdriver
to secure the metal ends of the fuse into the
compartment.
CAUTION: Risk of fire. Replace fuse only with 2.5 Amp, 125 volt fuse.
5.
Slide fuse cover closed. If fuse cover is difficult to close, make sure fuse is secured
in place by pressing down on metal ends of the fuse.
6.
Risk of fire. Do not replace attachment plug. Contains a safety device (fuse) that
should not be removed. Discard product if the attachment plug is damaged.
DO NOT OPERATE APPLIANCE IF THE LINE CORD SHOWS ANY
DAMAGE OR IF APPLIANCE WORKS INTERMITTENTLY OR STOPS
WORKING ENTIRELY.
IMPORTANT: During the first few minutes of initial use, you may notice a slight odor.
This is normal and will quickly disappear.
6
Capítulos
Tabla de contenido
