Features - Insignia NS-19LCD Manual Del Usuario

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Insignia NS-19LCD 19" LCD TV

Features

Front
Control
Description
1
CH– and CH+ buttons
Press to change the TV
channel.
2
VOL– and VOL+
Press to decrease or increase
buttons
the volume.
3
Remote sensor
Receives signals from the
remote control. Do not block.
4
MENU button
Press to open or close the
on-screen display (OSD).
5
INPUT button
Press to select the signal
source.
6
Press to turn your TV on or
Power button
off. When your TV is on, the
power indicator is blue. When
your TV is in standby mode,
the power indicator is red.
7
Power indicator
Lights when your TV is turned
on (blue) or in standby mode
(red).
Back
You must remove the jack cover to see the
jacks.
To remove the jack cover:
Push the jack cover down, then slide the
cover to the right and remove it.
Back jacks
Jack
1
Component right
audio
2
Component left audio
3
AV OUT right audio
4
AV OUT left audio
5
AV OUT video
6
RF
7
Component video
Pr/Cr
8
Component video
Cover tabs
Pb/Cb
9
Component video Y
10
AV IN right audio
www.insignia-products.com
6
1
7
2
8
9
10
3
4
11
5
12
13
14
15
Description
If you are using a component
video connection, plug the
right audio cable into this jack
If you are using a component
video connection, plug the left
audio cable into this jack
Plug the right audio connector
on a standard audio/video
cable into this jack.
Plug the left audio connector
on a standard audio/video
cable into this jack.
Plug the video connector on a
standard audio/video cable
into this jack. You can connect
an external device, such as a
VCR for recording, another TV,
or a monitor.
Plug the antenna or cable TV
into this jack.
If you are using a component
video connection, plug the
Pr/Cr connector on a
component video cable into
this jack.
If you are using a component
video connection, plug the
Pb/Cb connector on a
component video cable into
this jack.
If you are using a component
video connection, plug the Y
connector on a component
video cable into this jack.
Plug the right audio connector
on a standard audio/video
cable into this jack to connect
an external device, such as a
VCR.
5
Tabla de contenido
loading

Tabla de contenido