Kenmore 116.31195 Manual De Uso página 23

8. Stretch the hose to maximum length
and then allow the hose to return to its
storage length,
If the dust cup and filter areas and the
hose areas are free of clogs, check the
nozzle air path.
CLOGS IN NOZZLE AIR PATH
1. Turn off and unplug the vacuum
cleaner.
2. Remove nozzle hose from body by (1)
pressing in locking tab and (2) sliding up
and out of retaining slot.
3. Inspect inlet of nozzle hose and clear
any obstructions.
4. Replace nozzle hose by sliding down
on retaining bracket until you hear a click.
5. Return the vacuum cleaner to the
upright position before plugging into an
electrical outlet.
-23-