Kenmore 116.31195 Manual De Uso página 17

CLEANING PRE-FILTER
1. Make sure the dust cup is empty.
2. Rotate dust cup lid assembly to unlock
(as indicated on the lid), and lift off.
LOCKED
(For Use)
UNLOCKED
(For Cleaning)
3. Grasp pre-fitter and rotate counter-
clockwise to remove.
UNLOCKED
(For cleaning)
4. Clean pre-filter by gently tapping over
a trash container.
5. Rinse with water only as needed, do
not use any detergent or soap.
6. Allow pre-filter to dry for 24 hours
before placing back into vacuum cleaner.
To Reinstall:
1. Align the slot on the pre-filter with the
alignment tab inside dust cup.
- Tabs
Slots
2. Rotate pre-filter clockwise to lock in
place.
LOCKED
(For Use)
3. Reinstall dust cup lid and turn to
locked position (as indicated on the lid).
LOCKED
(For Use)
UNLOCKED
(For Cleaning)
- 17-