Rip Curl World Tide & Time Manual De Instrucciones página 7

SPOT X BEACH INTRODUCTION
Just in case you can't find a preset location that can be customized to your local beach. Your watch is equipped
with a Spot X averaging tide function. Spot X follows the world accepted average tide cycle of 6hrs 12mins
and 25 seconds from High tide to Low tide. Spot X is present at the bottom of EVERY beach list and can be
used to track the tides for thousands of beaches worldwide.
SPOT X SETTING
-Select Spot X from any beach list. (See tide setting)
-Find the next HIGH tide time for the beach you want to create and set the information using the procedure
below. (Tide information can be found in the local newspaper or tide guide)
-In TIDE mode HOLD (RESET-) in for 2 seconds, the year will appear and flash, use (START+) &
(RESET-) to select the year.
-Press (SEARCH), the MONTH will flash in the top left hand corner.
-Use (START+) & (RESET-) to enter month of the next high tide.
-Press (SEARCH) the DATE will flash, use (START+) & (RESET-) to enter date of the next high tide.
-Press (SEARCH), the HOUR will flash, use (START+) & (RESET-) to enter hour of the next high tide.
-Press (SEARCH), the MINUTES will flash, use (START+) & (RESET-) to enter minutes of the
next high tide.
-Press (SEARCH), the S of Spot X with flash. You can rename Spot X to your local beach name by
following procedure below, or to leave the name as Spot X, simply HOLD (SEARCH) in for 2 seconds
to set and save all new Spot X information.
-Or use (START+) & (RESET-) to scroll through the alphabet and change the selected letter. Press
(SEARCH) to move to the next letter.
-Once complete, HOLD (SEARCH) in for 2 seconds to save all.
NOTE: When Spot X is set no RANGE information will be displayed, only the time of the next tide and tide
direction graph will be displayed.
17
7