Rip Curl World Tide & Time Manual De Instrucciones página 5

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 20
- Press (START+) to increase. Press (RESET-) to decrease.
- Once complete, you must hold (SEARCH) in for 2 seconds again to exit setting mode and save
any adjustments.
DUAL TIME & TIDE SETTING (TIME ZONE 2 (T2))
(You can have a 2nd tide & time location stored for ease when travelling or for down the coast)
- Ensure you are in MAIN SCREEN.
- Press (RESET-) to VIEW the second time zone.
- HOLD (RESET-) in for 5 seconds to change to the second time zone, T2 icon will appear and stay
displayed in the bottom left hand corner of your watch.
COMPASS SETTING
IMPORTANT: Before use and for accurate readings the Compass MUST be calibrated.
NOTE: Accurate calibration is best done outside or at least away from strong magnetic forces such as computers,
refrigerators, TV's or other large metal objects.
To calibrate for MAGNETIC NORTH.
- Press (SEARCH) to advance to Compass mode.
- HOLD (SEARCH) in for 2 seconds and OFFSET appears in the display.
NOTE: No offset is required when calibrating for Magnetic North.
- To continue calibration press (SEARCH). Your watch will instruct you to TURN CW. This means, take
the watch off, hold it level, and rotate it SLOWLY in a clockwise direction. It will take one minute of
slow clockwise rotation to complete the calibration. Once the calibration is complete DONE will appear
in the screen and then the compass direction will appear.
- Use the arrow on the top of the watch case to find your direction.
- To conserve battery life, after 60 seconds the Compass will revert to MAIN SCREEN.
To calibrate for TRUE NORTH an OFFSET is required.
***See below.
Enter your OFFSET by using (START+) or (RESET-) then press (SEARCH) to continue calibration. Your watch
will instruct you to TURN CW. This means, take the watch off, hold it level, and rotate it SLOWLY in a clockwise
direction. It will take one minute of slow clockwise rotation to complete the calibration. Once the calibration is
complete, firstly DONE will appear in the screen and then the compass direction will appear.
- Use the arrow on the top of the watch case to find your direction.
- To conserve battery life, after 60 seconds the Compass will revert to MAIN SCREEN.
***OFFSET – Entering the correct OFFSET makes the watch point to True North, OFFSETS vary for different
places. To find the offset for your specific location please log on to...or see some common offsets we have
listed on below. www.ngdc.noaa.gov/seg/geomag/jsp/struts/calcDeclination
NOTE: For accurate compass readings you re-calibrate your compass regularly or after it has come into contact
with strong magnetic forces. Eg: An airplane trip or long distance travel in a car or train.
ALSO NOTE: After calibration, compass readings should be taken away from large metal objects and appliances.
Eg; TV, Fridge, computer, car and etc.
15
5
Tabla de contenido
loading

Tabla de contenido