3.1
Transport
During transport, the filters must be secured against slipping and falling. If the filters are secured with
tensioning straps for transport, ensure that the filter remains undamaged.
It is imperative to avoid stresses caused by impacts. Under no circumstances may the filters be rolled or
hauled over the ground.
3.2
Storage
Any necessary interim storage of the filters must be on a suitable, level surface. During storage, damage
caused by environmental factors or external influences must be avoided.
Note:
There is a borehole with a diameter of 6 mm on each of the two side
surfaces of the filter .These boreholes are used for emergency
drainage and thus to avoid overflowing the filter.
www.graf.info
3.
Transport and storage
4.
Technical data
8 / 20