Oregon Scientific RRM968P Manual De Instrucciones página 10

3. Adjust the projected image as below.
Projector Features
Feature Effect
Adjustable Rotates the
Projection projection 180°
Focuses
FOCUS
projection
Knob
IMAGE Dial D3 rotates
ROTATION projection
KNOB
°
180 Button D1
ROTATION horizontally flips
BUTTON the projection
180°
For continuous projection, you must connect
When the power adapter is connected to the unit, the
will be activated. To maintain projection, slide the [PROJECTION
ON ] switch to the "On" position.
To deactivate the feature, slide the switch back to the "Off" position.
it is recommended that to increase the life-time of the projection LED
Instructions
Tilt swivel projection
housing to alter the
direction of projection
Rotate Dial D2 to focus
projection
Rotation of projection
allows user to place
clock in a convenient
location
Flips an image to
maintain an upright
position
the power adapter.
projector
10
you keep [ PROJECTION ON
daytime.
Section V — Others
BACKLIGHT
To turn on the EL backlight of the LCD Display
[SNOOZE/LIGHT].
HOW TO RESET THE UNIT
Press [RESET] to reset the settings
When [RESET] is pressed, all settings will return to the default
values and memory records will be erased.
PRECAUTIONS
This unit is engineered to give you years of satisfactory service if
you handle it carefully. Here are a few precautions.
1. Do not immerse the unit in water. If you spill liquid over it, dry
it immediately with a soft, lint-free cloth.
2. Do not clean the unit with any liquid containing alcohol,
detergent, abrasive or corrosive materials. They may scratch the
plastic parts and corrode the electronic circuit.
3. Do not subject the unit to excessive force, shock, dust,
temperature or humidity, which may result in malfunction,
shorter electronic life span, damaged battery and distorted parts.
] in the "off" position during
for 5 seconds press
if the unit is malfunctioning