Power Off; Troubleshooting; Common Issues - Premium PRF52 Manual Del Usuario

Unplug the appliance. Remove the lamp cover at the back of the thermostat
box. Remove the old bulb and place the new one. Put back the lamp cover.

4. Power off

Avoid turning off the refrigerator. Let it work for long periods of time. Even
there is no food stored, keep it on in order to keep it working properly for a
long time.
If you must turn it off and not use it for a long period of time, turn it off, follow
the information above to clean it and keep it in a dry and clean place. Store
the refrigerator with the door slightly open, so the door gasket will not stick
to the cabinet.

Troubleshooting

1. Common Issues

In case of a water flowing sound, this is the normal sound of the
compressor.
If you hear a thumping sound, this is caused by a sudden temperature
change that makes materials to shake a little.
Compressor is hot. When it is working, the highest temperature is 90
Left and right side of the refrigerator are hot. When the compressor is
working, the two sides of the appliance can be 55
The outside of refrigerator shows condensation. It is caused by
environmental moisture. Just dry it.
2. Troubleshooting
If the refrigerator is not working normally, you can check by yourself the
following before calling for service:
The refrigerator stops working:
If the thermostat is turned to "0".
If the plug is not properly connected to the electric outlet.
If there is no electric power or a circuit breaker is off.
If the appliance is restarted within 5 minutes after being turned off.
Compressor is not working:
Thermostat is on "0".
The door is not properly closed.
The environment temperature is too high or the appliance is under the
sun.
The refrigerator is overloaded and it affects the cold air flow.
There is hot food in the refrigerator.
The temperature of stored food is too high:
The refrigerator is too full.
The door is not properly closed or it has been opened and closed too
many times.
o
C.
o
C