Tabla de contenido
Idiomas disponibles
Idiomas disponibles
4. Likewise, if you want to play music directly from a flash drive, simply insert your
storage device into the USB port on the back of the unit.
5. Plug the supplied power adapter into the DC jack on the speaker. Then plug
the AC cable into the wall outlet.
6. After making sure all connections are done correctly, power the soundbar by
turning on the main switch located on the back.
V. Advanced operation
Note: Before installing this product, please make sure your device has the built-in
Bluetooth® feature available. If your device is not Bluetooth-enabled, you must
purchase a Bluetooth dongle, preferably version V.2.1 or above.
Pairing the soundbar with your Bluetooth device
If you haven't done so already, switch the soundbar on using the main switch
1.
or the power button
found on remote control. The welcome screen on
the LCD will become illuminated.
Place both devices not more than one meter away from each other.
2.
Enable the Bluetooth function on your audio device and set it to discover the
3.
wireless soundbar.
Select the Bluetooth feature on the soundbar by pressing the Mode button on
4.
the unit or the BT key on the remote control.
The bLUE
icon starts blinking on the LCD screen, accompanied by an
5.
MP3
audible tone, to indicate that the system has entered into the pairing mode.
Once the speaker appears listed under the newly found Bluetooth devices
6.
(KSB-100), it will ask if you want to pair with it.
7.
Accept by pressing Yes or Ok on your mobile device. If you have a lower
Bluetooth version, you may be prompted to enter the passkey 0000 (4 zeros).
8.
If pairing is successful, another beep will be heard, making the bLUE
glow solid on the LCD screen.
9.
If after 60 seconds the pairing process fails, please repeat steps 1 through 7
described above.
10.
The soundbar will automatically re-pair with the last memorized device when
the Bluetooth function is re-enabled or when it is turned on again after being
powered off.
VI. Technical speci cations
MPN
Device
Type
Reference RMS
Sound enhancement technology
Standby mode
AC input
Speaker
Driver unit
Reference RMS
Frequency
Impedance
Sensitivity
Sound pressure level (S.P.L.)
Signal to noise ratio
icon
MP3
KSB-100
Wireless 2.0 channel soundbar
80W
Software control BASS enhancement
Triggered after 10 minutes of inactivity
100/240V
60/50Hz, autosensing
Four 2.5 inch drivers
80W
100Hz-20kHz
12 ±15%
82dB ±3dB
82dB ±3dB
≥60dB
Tabla de contenido
