Sd Card Slot; Control Button - Axis Q16 Serie Guia De Instalacion

Buzzer signal for focus assistant
Note
Only valid for optional P-iris, DC-iris or manual iris lenses.
Buzzer
Fast interval
Medium interval
Slow interval
Status LED behavior and buzzer signal for leveling assistant
For information on the function button used for leveling the camera, see page 15.
Press and hold the function button (2) for more than two seconds to level the camera.
• When the camera is level, both LEDs are steady green, and the beep is continuous.
• When the camera is not level, the LEDs flash a combination of red, green and orange, and
the beep occurs at slow intervals.
Both LEDs briefly flash green to indicate that the leveling is getting better.

SD card slot

NO TICE NO NO TICE TICE
• Risk of damage to SD card. Do not use sharp tools, metal objects, or excessive force when
inserting or removing the SD card. Use your fingers to insert and remove the card.
• Risk of data loss and corrupted recordings. Do not remove the SD card while the product
is running. Unmount the SD card from the product's webpage before removal.
This product supports microSD/microSDHC/microSDXC cards (not included).
For SD card recommendations, see axis.com
Buttons

Control button

For location of the control button, see Product overview on page 8.
The control button is used for:
• Enabling the Focus Assistant. Press and very quickly release the control button.
• Resetting the product to factory default settings. See page 12.
AXIS Q16 Network Camera Series
Lens
Optimally adjusted
Less optimally adjusted
Poorly adjusted
15
EN