How to Use the Can Opener
1. Plug into outlet. Lift up
Piercing Lever.
NOTES:
• This Can Opener will easily open all standard-size cans.
• It will be necessary to position the Can Opener at the edge of the
counter, allowing for clearance to open cans taller than the Can
Opener. To ensure taller cans do not fall from the Can Opener,
place hand under can.
• If there is a bump, dent, or heavy seam in the rim of the can, open
other end of can or start cutter just beyond it.
• Cans made with aluminum lids will not adhere to magnet.
• The motor of your Can Opener will never require oiling.
• To use cord storage on back of Can Opener, push in or pull out
cord as needed.
4
2. Place rim of the can firmly
under Magnetic Lid Holder and
against Geared Wheel.
Before first use: Wash removable parts
according to "Care and Cleaning."
3. Press Piercing Lever all the
way down. The motor will
begin turning can and cutting
lid. (It is not necessary to
hold the Piercing Lever down
during the cutting action. It
may be necessary to hold the
bottom of some large, heavy
cans during the cutting action.)
4. The motor will stop
automatically when the can is
open.