Faucet Installation - BLACK&DECKER Price Pfister 49 Serie Manual Del Usuario

Thank you for purchasing this Price Pfi ster product. All Price Pfi ster products are carefully engineered, and factory tested to
provide long trouble-free use under normal conditions. This product is easy to install using basic tools and our easy to follow
illustrated instructions. If you have any questions regarding this product, call 1-800-Pfaucet (1-800-732-8238).
1 BEFORE PROCEEDING
WARNING: Read all the instructions completely before proceeding. Price Pfi ster
recommends calling a professional if you are uncertain about installing this product!
This product should be installed in accordance with all local and state plumbing and
building codes.
NOTE: If installation surface depth is thicker than 1 1 / 2 ", order spare part
number 971-026.
2
2 SHUT OFF WATER SUPPLY
Locate water supply inlets and shut off the water supply valves. These are usually found
under the sink or near the water meter. If you are replacing an existing faucet, remove
the old faucet from the sink and clean the sink surface thoroughly.
3
3 TOOLS RECOMMENDED
• Plumber's putty • PTFE Plumber's Tape
• Adjustable wrench • Pliers
• Cloth
Your installation may require new supply lines and / or shut-off valves or other additional
tools.
4
Q
P
F
D
M
E
4 CHECKING THE CONTENTS OF THE BOX
Upon opening the box, check to ensure that all of the following items are included.
A Spout B Handles (2x)
D Valve Bodies (2x) E Pop-Up Assembly
G Bag [Flange, Seal Ring, Plastic Nut] (2x)
J Bag [Nuts (2x), Square Washer (2x)]
L Mounting Washer M Bag [Ball Rod, Strap] N Nut
P Stem Extender (2X) Q Hex Wrench
If any of these items are missing, please contact Price Pfi ster Consumer Service at
1-800-Pfaucet (1-800-732-8238).
• Slotted screwdriver
• Flashlight
A
B
B
P
G
G
C
D
K
L
N
H
C Spout Base
F Pop-Up Rod
H Hose
K Seal Ring
ENGLISH
5
5B
5 SPOUT ATTACHMENT
Insert Lift Rod (5A) into hole at the back of Spout Body (5B). Apply plumber's putty
into putty groove in bottom of Seal Ring (5C). Place Seal Ring (5C) against the bottom
of Spout Base (5D). Place Spout Base (5D) against the bottom of Spout Body (5B).
With Spout Body (5B) facing forward, carefully install the Lift Rod (5A) and Shank (5E)
through the center hole of sink (5F).
6
6E
J
6 SPOUT INSTALLATION
From underneath sink, place Mounting Washer (6A) onto Spout Shank (6B) and align
Lift Rod (6D) with slot in Mounting Washer (6A). Make sure that the bumps on Mounting
Washer (6A) are facing up. Be sure Spout (6E) is centered and facing forward and fi rmly
hand tighten the Mounting Nut (6C). Secure Nut (6C) not to exceed a
Caution: Do not over tighten!
2

FAUCET INSTALLATION

5A
5E
5F
6B
6C
5B
5D
5A
5C
6D
6A
1 / turn.
4