Kathrein UFOcompact plus UFG 810 Manual Del Usario página 12

• The safety regulations set out in the current EN 60728-11 and EN 60065
standards must be complied with.
• Connectors: RF connector,75 Ω (series F) according to EN 61169-24
Current-carrying device
• Do not open or tamper with the device!
• When working on the system always unplug the power supply unit from
the wall socket!
• Ensure adequate clearance! Clearance all round at least 5 cm!
• Not suitable for overhead mounting
• Free circulation of air must be possible to discharge the heat emitted by
the unit. Danger of overheating!
Attention:
• Measurements on the backplane plugs not allowed (Risk of short circuits!)
• Do not cover the louvres
• Do not place liquid-fi lled items on top of the power supply unit or the fans.
• The power supply and louvres are not to be exposed to dripping or splash-
ing water
• The mains plug must be easily accessible and operable.
• The only reliable method of disconnecting the UFG 810 power supply from
the mains is to unplug it.
• Connect the module carrier to the wall outlet with a protective earthing
• The unit may only be operated with functioning extractor fans
• Keep fi ngers and other body parts away from any moving components
e.g. extractor fans at all times. Otherwise you may be injured!
Note:
For wall installation, the system must be
earthed with the earthing clamp pictured. If
required, the earthing clamp may also be
installed on the opposite side of the module
carrier.
3 / 8