Installation Steps - Kathrein UFOcompact plus UFG 810 Manual Del Usario

Installation steps

The module carrier UFG 810 is not only designed for wall mounting but also for installation
in 19" cabinets.
Wall mounting:
the module carrier can be directly fi xed to the wall using three screws (ø 6-8 mm).
Weight when fully equipped: approx. 25 kg. Dimensions for wall mounting:
(see illustration of UFG 810 rear panel below, values in mm).
Installation in 19" cabinet
In air-conditioned rooms with a maximum ambient temperature of 40 °C, up to four module
carriers can be stacked one above the other in a standard 19" cabinet (with 40 RU). A
minimum of one height unit (1 RU) clearance should be left between each of the units
Note:
For installation in 19" racks, the two side pieces and the earth clip must be removed.
4 / 8