Troubleshoot - Cisco Catalyst 9800 Configuración

AP Name
Country IP Address
------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------
3700-calo
MX 172.16.0.200
AP3702-02
abcde123456789012345

Troubleshoot

Ejemplo de salida de la consola de una sincronización exitosa del par HA entre dos WLC del
hardware 9800:
9800 WLC-1
9800 WLC-1# chassis ha-interface local-ip 203.0.113.1 /24 remote-ip 203.0.113.2
9800 WLC-1# show chassis
Chassis/Stack Mac Address : 00a3.8e23.a240 - Local Mac Address
Mac persistency wait time: Indefinite
Local Redundancy Port Type: Twisted Pair
Chassis# Role
-------------------------------------------------------------------------------------
*1 Active 00a3.8e23.a240
9800 WLC-1# wr
Building configuration...
[OK]
9800 WLC-1# reload
Reload command is being issued on Active unit, this will reload the whole stack
Proceed with reload? [confirm]
MMM DD HH:MM:SS.XXX: %SYS-5-RELOAD: Reload requested by console. Reload Reason: Reload Command.
Chassis 1 reloading, reason - Reload command
.
.
. *MMM DD HH:MM:SS.XXX: %IOSXE_REDUNDANCY-6-PEER: Active detected chassis 2 as standby.
*MMM DD HH:MM:SS.XXX: %STACKMGR-6-STANDBY_ELECTED: Chassis 1 R0/0: stack_mgr: Chassis 2 has been
elected STANDBY.
*MMM DD HH:MM:SS.XXX: %PMAN-3-PROC_EMPTY_EXEC_FILE: Chassis 2 R0/0: pvp: Empty executable used
for process bt_logger
*MMM DD HH:MM:SS.XXX: %PMAN-3-PROC_EMPTY_EXEC_FILE: Chassis 2 R0/0: pvp: Empty executable used
for process mmap_schema
*MMM DD HH:MM:SS.XXX: %CMRP-5-PRERELEASE_HARDWARE: Chassis 2 R0/0: cmand: 0 is pre-release
hardware
*MMM DD HH:MM:SS.XXX: %REDUNDANCY-5-PEER_MONITOR_EVENT: Active detected a standby insertion
(raw-event=PEER_FOUND(4))
*MMM DD HH:MM:SS.XXX: %REDUNDANCY-5-PEER_MONITOR_EVENT: Active detected a standby insertion
(raw-event=PEER_REDUNDANCY_STATE_CHANGE(5))
*MMM DD HH:MM:SS.XXX: %IOSXE_PEM-6-INSPEM_FM: PEM/FM Chassis 2 slot P0 inserted
*MMM DD HH:MM:SS.XXX: %IOSXE_PEM-6-INSPEM_FM: PEM/FM Chassis 2 slot P2 inserted
*MMM DD HH:MM:SS.XXX: % Redundancy mode change to SSO
*MMM DD HH:MM:SS.XXX: %VOICE_HA-7-STATUS: NONE->SSO; SSO mode will not take effect until after a
platform reload.
Slots
2
2
MX 172.16.1.198
Mac Address Priority Version
1
AP Model Ethernet MAC
State
3702I 7c0e.ce14.8098
Registered
3702I f07f.06e5.1114
H/W Current
State
V02 Ready
Radio MAC Location
7c0e.ce7d.d910 CALO
f07f.06f1.3730
Registered
IP