Safety Instructions - BaByliss E702XTE Manual Del Usuario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 24
removed. Make sure the clipper
is turned off. Hold the clipper
with the blades pointing up and
remove them by pressing the top
of the blade. (Fig. 7)
Brush the blades using the
cleaning brush to remove any
hair.
Self-lubricating blades
The blades of your clipper have
a reservoir pad that dispenses
the amount of oil necessary for
your clipper to operate properly,
every time. It is nevertheless
recommended that you occa-
sionally refill, when you notice the
clipper isn't performing as well.
Remove the blades as described
above.
Carefully squeeze a few drops of
BaByliss oil onto the pad. (Fig. 8)
Then put the blades back on the
clipper.
BaByliss oil is specially formulated
for clippers, it will not evaporate
or slow the blades down.
You can get new blades when
these are worn or damaged.
Ni-MH BATTERIES
This clipper has Nickel-Metal
Hydride batteries.
In an effort to protect the
environment,
should be removed and properly
disposed of when the unit is no
longer operating. To remove
the battery block for disposal
or
recovery,
instructions:
. First,
unplug
Remove the 3 screws on the
these
batteries
follow
these
the
clipper.
back, 2 at the top and  at the
bottom.
2. Open the clipper and remove
the batteries using wire cutters.
3. To protect the environment, do
not dispose of your batteries
with your ordinary household
waste. For more details on
recovery of materials and waste
treatment
contact the waste disposal
services in your region.

SAFETY INSTRUCTIONS

• WARNING:
containing this product, or it's
packaging, can be dangerous.
To avoid the risk of suffocation,
keep these bags out of the
reach of babies and children.
A polyethylene bag is not a
plaything.
• WARNING: do not use this
appliance near a bath or any other
receptacle with water in it.
• If the appliance is used in a
bathroom, unplug it after use.
Using the appliance near a source
of water may be dangerous, even
if the appliance is unplugged.
• Do not immerse the appliance in
water or any other liquid.
• Stop
using
immediately
damaged. The cord must be
replaced by the manufacturer, its
after sales service or a similarly
8
facilities,
please
Polyethylene
the
appliance
if
the
cord
bags
is
Tabla de contenido
loading

Este manual también es adecuado para:

E702yte

Tabla de contenido