Tabla de contenido
usb and remote station
USB CHARGERS
USB charging connections are located on each side of the base,
on the underside of the head section of the platform. Charge two
smart devices at the same time.
Voltage: 5V DC
Current: 2.5A (max 13 Watts)
12
MAGNETIC REMOTE HOLDER
Read and remove warning sticker located on top of the magnet
before attaching the remote to the base.
WARNING:
This product contains Neodymium MAGNETS which may
interfere with devices such as pacemakers, ICD's and any
other device sensitive to magnetic fields. It is STRONGLY
recommended that owners of such medical devices consult
their physician prior to using this product.
emergency power down box
In the event that the base is stuck in an articulated position during a power outage- the Power Down Box
will return the base to a flat position.
(2) 9 Volt batteries are required to operate the power down feature and are NOT included.
STEP 1
Locate the Power Down Box under the base.
During the first few minutes of the power outage, the button on the
box will blink red so that it is easy to locate.
STEP 2
Press and hold the button until the base is flat.
Note: The red light will turn off after several minutes, however the
button can be pressed at any time during the loss of power to
bring the base flat.
For emergency use only.
The Power Down Box can only be used to bring the base to a
flat position. It will not bring the base to a flat position when
the base is connected to a working power source.
13
Tabla de contenido
